- Community Home
- >
- Storage
- >
- Data Protection and Retention
- >
- StoreEver Tape Storage
- >
- MSL5060 library "HTH Error"... current trace attac...
StoreEver Tape Storage
1753768
Members
4993
Online
108799
Solutions
Forums
Categories
Company
Local Language
юдл
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
юдл
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Go to solution
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО02-07-2007 01:52 AM
тАО02-07-2007 01:52 AM
I've got an MSL5060 library with an entry in the event log that I don't understand yet. If you have any experience w/ the msl5060 errors and decoding the trace log, please help me out.
The event log contains:
20. 02/04/2007 13:54:44 30d00h39m51.06s SCSI port 1 invalid DSA
21. 02/04/2007 13:54:44 30d00h39m51.06s SCSI HTH Error. Port 1 Target -286331154, S_ID 0xEEEEEEEE, CDB[0] 0xEEEEEEEE, Device Type -286331154
22. 02/04/2007 13:54:44 30d00h39m51.06s SCSI port 1 bus reset
The current trace is attached.
Thanks in advance!
-denver
The event log contains:
20. 02/04/2007 13:54:44 30d00h39m51.06s SCSI port 1 invalid DSA
21. 02/04/2007 13:54:44 30d00h39m51.06s SCSI HTH Error. Port 1 Target -286331154, S_ID 0xEEEEEEEE, CDB[0] 0xEEEEEEEE, Device Type -286331154
22. 02/04/2007 13:54:44 30d00h39m51.06s SCSI port 1 bus reset
The current trace is attached.
Thanks in advance!
-denver
Solved! Go to Solution.
2 REPLIES 2
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО02-07-2007 06:35 PM
тАО02-07-2007 06:35 PM
Solution
The traces show communication on the FC, there are some communication between the NSR and the Switch taking place.
The error you indicate in the post is an error on the SCSI bus, and shoud appear in the event log, not in the trace, because usualy the traces record only the last few second.
anyway, the error HTH is a harware layer error. usualy communication error due to bad cable, or bad terminator. this error is reinforced by the other error invalid DSA.
I suggest you to check for any damaged compent on the scsi chain connected to SCSI port 1 of your NSR, including terminator, cables, drive, and NSR. bent pins, or damaged cables, or bad cabling are the usual cause of these errors
Marino
The error you indicate in the post is an error on the SCSI bus, and shoud appear in the event log, not in the trace, because usualy the traces record only the last few second.
anyway, the error HTH is a harware layer error. usualy communication error due to bad cable, or bad terminator. this error is reinforced by the other error invalid DSA.
I suggest you to check for any damaged compent on the scsi chain connected to SCSI port 1 of your NSR, including terminator, cables, drive, and NSR. bent pins, or damaged cables, or bad cabling are the usual cause of these errors
Marino
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО03-01-2007 01:55 AM
тАО03-01-2007 01:55 AM
Re: MSL5060 library "HTH Error"... current trace attached
Thanks! Checked cables and terminators... made minor changes and haven't had any problems.
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP