MSL5060

[Michael Schulte zur Sur]

Hi,

would you care to explain a bit more?
I know, it can leave you speechless here. ;-)

Michael

[David Ruska · Accepted solution]

Gudmundur,

I finally have the solution for the stacked (master/slave) firmware update problem when the library is on 4.08 firmware (I suspect you found a workaround in the mean time).

[gfh_1]

Hi David
the library is still on 4.08 firmware, but I had another library with same case and I split it up in standalone and firmware upgrade was ok.

[gfh_1]

But what is the solution for the stacked firmware update from 4.08?

And David thanks for your help.
Gudmundur

[David Ruska]

Gudmundur,

I still have your email address, and can send you the detailed instructions for getting around the 4.08 firmware update issue.

There is a firmware bug in 4.08 which prevents firmware updates from succeeding in a master/slave configuration (regardless of which tool or method is used).

We were actually very close with the one workaround that I provided (powering down the slave). We did some testing a came up with workround without turning of power.

[gfh_1]

David
can you email the workround without turning of power to me.

thanks
Gudmundur

[David Ruska]

Yes, I sent it in email Friday afternoon, about 5PM.