Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL6000 + EVA4000 + BL460C

Zubair Alam
Advisor

MSL6000 + EVA4000 + BL460C

Hi,
IM NOVICE IN MSL6000.
I have MSL6000 LIBRARY + EVA4000 + BL460C with EMBEDED SAN SWITCH.I WANT TO CONFIGURE MSL6000 LIBRARY WITH BL460C SERVER.I CONNECTED FIBRE WITH LIBRARY FIBRE PORT TO BL460 SAN SWITCH.
BUT MSL6000 LIBRARY IS NOT APPREAING IN ANY BLADE SERVER.
CAN ANY ONE HELP ME

2 REPLIES
Mark Poeschl_2
Honored Contributor

Re: MSL6000 + EVA4000 + BL460C

I suspect the mapping in the NSR (FC to SCSI bridge device) that's in the library is not correct. Here is a link to the manual for the NSR:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg29075/lpg29075.pdf
Zubair Alam
Advisor

Re: MSL6000 + EVA4000 + BL460C

Hi,
Thanks...
I followed this document. I did following acgtions on NSR but didnt get any result.
1) I tried with Serial port communication with RS232 port and serail port.
I tried all options with 19200,9600 etc.
It doesnt show any comunication.
2) Tried to communicate with 10BaseT with 1.1.1.1 port and didnt get any result.
It doesnt even ping 1.1.1.1
3) I tried plug in cross over cable one end at my laptop and one end directly on 10BaseT port but didnt get any result.

Do u think there might be any hardware failure on NSR card
kindly help me ....
Thanks again