HPE Community
StoreEver Tape Storage
1753399 Members
7293 Online
108792 Solutions
New Discussion

Re: MSL6000 front panel msg: "Magazine type changed"

 
ZRELLLI
HPE Pro

‎07-13-2016 03:53 AM

‎07-13-2016 03:53 AM

Re: MSL6000 front panel msg: "Magazine type changed"

ANY  UPDATE PLEASE FOR THIS ISSUE :

 

MSL6000 front panel msg: "Magazine type changed"

 

"Some of the inserted magazines (lower right) are of a different type than the ones removed.

Leaving these magazines in the library will cause its geometry to change.

Press OK to reconfigure and reboot, press CANCEL to replace magazine."

Accept or Kudo

0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎07-13-2016 05:02 AM

‎07-13-2016 05:02 AM

Re: MSL6000 front panel msg: "Magazine type changed"

Likely the same reason as in the posts above - a sensor problem.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.