Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL6030 Autochanger is not visible at HP-UX Server

SOLVED
Go to solution
Emad Omar
Regular Advisor

MSL6030 Autochanger is not visible at HP-UX Server

Hi all,

I have dificulties to find the autochanger for MSL6030. When I issued the command ioscan I got an unknown device for MSL6000. Only I got the tape and the router.Find attached the output of this command: ioscan.
Also I need to know if there is a special driver to be added at the kernel of the HP-UX. I have the HP-UX Version 11.23 installed at PA-RISC Server.When I tried to configure the Data Protector V5.5 at the HP-UX Server, I found that Library is configured but I can not scan or format for tapes.Zoning is configured at SAN Switch, but I need to configure the Data Protector after finding the autochanger.

So please advise . .

Emad Omar
3 REPLIES
Luk Vandenbussche
Honored Contributor
Solution

Re: MSL6030 Autochanger is not visible at HP-UX Server

Hi,

Add the drivers autoch en schgr to your kernel.
This requires a reboot
Emad Omar
Regular Advisor

Re: MSL6030 Autochanger is not visible at HP-UX Server

Hi all,

I fixed the problem by using the following :
#sam
at sam menu use Kernel Configuration, then go to Module.Search for schgr. I found it's state is unused.by pressing modifiying its parameter to static by clicking char "m", then system reboot.
Antonio Zitarosa
Occasional Visitor

Re: MSL6030 Autochanger is not visible at HP-UX Server

Hi Omar,

I try to apply your suggest and it works!
Thank you very much!!

Regards,
Maurizio Gatti