MSL6030 - Bin Fetch Failure. Unable to solve currently.

[Edmund Wong_1]

Below is the error message from the server when I use the MC command to check on the library:

[ROOT sgpds11]/ # mc -p /dev/rac/c12t3d0 -r DS|more

ERROR: 0x2 Not Ready : 0x401 Logical unit in process of becoming ready



When using the web interface on sgpds11-l2, the status of the library is as follows:



The library is not ready

-- The library is initializing.


The strange thing is that by accessing the NSR-A and NSR-B, I could see all the devices on the library.

Could any expert please help me out with this problem please? Thank you so much,
Sincerely,
Edmund

[David Ruska]

> ERROR: 0x2 Not Ready : 0x401 Logical unit in process of becoming ready

From your subject line, is the library in an error state following a hard robotic (i.e. bin fetch) error? There may be a dialog on the front panel with an FSC code and a request to reboot, and that is why the library medium changer says it is "not ready".