MSL6030 Windows 2003 modifiy LUN

[dblazquez]

Hello

I have a MSL6030 with a NS e1200 connected to windows 2003.
I see perfect the mediumm changer and the tape drive y de device manager.
The medium changer has scsi Bus 0,Target 2,Lun 1 and the tape has Bus 0,Target 2,Lun 2.

In the NS E1200 configuration i have in FC PORT 0:

FC LUN 0 => HP NS E-1200
FC LUN 1 => HP MSL6000
FC LUN 2 => HP Ultrium-3

My problem:
I am installing an aplication in windows 2003 that need to see de MSL in lun 0 not in lun 1.
How can i change this to see correct?
I attach the map o FC PORT 0

Thnaks a lot

Best regards
David

[Steven Clementi · Accepted solution]

David:

In that mapping screen, click clear map, then change the fill map rop down to "Target/Bus" and click the fill map button.

This should put the library and drives first, and the nsr last.



Steven

[dblazquez]

Ok thanks for the info.

Now i have the msl6030 in the lun0. but the aplication (Connected Data Protector PC) still d'ont see the msl6030.

Sombedy now about this aplication and the hsm module?

Thanks

David