Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL6030 ioscan

Uday_5
Occasional Visitor

MSL6030 ioscan

I have connected MSL6030 2 drive library to A class running 11.11 using SCSI.

When i do ioscan -funC autoch, it shows MSL5000 series

autoch 1 0/6/0/0.0.0 schgr CLAIMED DEVICE COMPAQ MSL5000 Series
/dev/rac/c7t0d0

What should be done so that it shows as MSL6000?
3 REPLIES
Slawomir Gora
Honored Contributor

Re: MSL6030 ioscan

Hi,

In my opinion there is no way to change this
because MSL5000 and MSL6000 has the same
changer robot.
Kurt Beyers.
Honored Contributor

Re: MSL6030 ioscan

Uday,

Start with an unonditional scan of the autochanger 'ioscan -fnC autoch' to see if it remains at MSL5000

But anyway as long as the 'ioscan -fnC tape' gives a Ultrium2 drive as response, it is only an estetical error.

best regards,
Kurt
Uday_5
Occasional Visitor

Re: MSL6030 ioscan

I did ioscan -fnC autoch, it shows as MSL5000.

I checked on front panel LCD it says MSL6000 series,but browsing through Menu -> SCSI options -> its displays
Product Identification "MSL5000" &
Vendor Identification "Compaq"