MSL6030 with E1200 fiber router, the autochanger is unknow in the ioscan

[ziad_1]

Hi all,

I have one MSL6030 with fiber connection E1200 fiber router, I can see the Ultrium and the fiber-SCSI router in HP-UX but I can not see the autochanger and I can't access it from Data protector ( you find attached the ioscan ) please can someone advise which driver name in the kernel configuration I must add (I don't have the schgr in my kernel configration) or maybe I must get a separate driver for it. tanks for your urgent reply.

unknown -1 0/0/14/1/0.1.13.255.0.0.0 UNCLAIMED UNKNOWN HP MSL6000 Series

tape 5 0/0/14/1/0.1.13.255.0.0.1 stape CLAIMED DEVICE HP Ultrium 2-SCSI

/dev/rmt/5m /dev/rmt/5mnb /dev/rmt/c21t0d1BESTn

/dev/rmt/5mb /dev/rmt/c21t0d1BEST /dev/rmt/c21t0d1BESTnb

/dev/rmt/5mn /dev/rmt/c21t0d1BESTb

tape 6 0/0/14/1/0.1.13.255.0.0.2 stape CLAIMED DEVICE HP Ultrium 2-SCSI

/dev/rmt/6m /dev/rmt/6mnb /dev/rmt/c21t0d2BESTn

/dev/rmt/6mb /dev/rmt/c21t0d2BEST /dev/rmt/c21t0d2BESTnb

/dev/rmt/6mn /dev/rmt/c21t0d2BESTb

ctl 96 0/0/14/1/0.1.13.255.0.0.3 sctl CLAIMED DEVICE HP NS E1200-160

/dev/rscsi/c21t0d3



Kindly REgards

[ziad_1]

hi all,

the problem was solved thanks it was to add schgr for 700 series.

[Emad Omar]

Hi Ziad,

Let me know how can you solve this issue??
Or tell me the procedure you did for adding the schgr at Kernel of HP-UX V2??!!

I have the same problem and I found that no schgr device appear at ioscan command.
Please find attached the output of the ioscan -f

Please advise . . .

Emad Omar

[ziad_1]

you must add the sgchr driver from the kernel driver in SAM.