HPE Community
StoreEver Tape Storage
1751712 Members
5561 Online
108781 Solutions
New Discussion

MSL6060 issue:FC port 0 INBOUND_SCSI_COMMAND Indicated, but NOT a SCSI CMD, R_Ctl x1

 
chen_8
Occasional Contributor

‎08-27-2006 09:25 PM

‎08-27-2006 09:25 PM

MSL6060 issue:FC port 0 INBOUND_SCSI_COMMAND Indicated, but NOT a SCSI CMD, R_Ctl x1

Hi!
Cu do backup with DP via SAN onto MSL6060 FC Tape Library.(4 Tape-Drives and 1 FC-Router)
An SCSI-Error ( 766. 08/26/2006 20:27:44 31d09h10m36.72s FC port 0 INBOUND_SCSI_COMMAND Indicated, but NOT a SCSI CMD, R_Ctl x1 ) issue and interrupt the backup jobs.

environment: HPUX11i/DP/SAN switch;the MSL6060 firmware is at the latest version

Anybody have any ideas? Thanks
0 Kudos
Reply
1 REPLY 1
Marino Meloni_1
Honored Contributor

‎08-27-2006 10:23 PM

‎08-27-2006 10:23 PM

Re: MSL6060 issue:FC port 0 INBOUND_SCSI_COMMAND Indicated, but NOT a SCSI CMD, R_Ctl x1

These usualy are caused by communication error on the Fibre channel. my suggetion is to monitor the logs of the FC switch, and eventaly clean the FC cables, swapp ports etc..
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.