MSL6060 not sending SNMP traps

[Chris Warne_1]

Don't know about the original author, but personally we never resolved this issue. Sorry!

[Norbert Toth]

Hello guys,

I have the same issue with 5.20 firmware. Did somebody opened a call for this issue?

- n.

[Jusmadee]

Hi All,

I am having similar issues with MSL5030. I am unable to capture any snmp traps from the attached server. The non-vol config is as such
>>>>>>>>>>>>>>> Nonvol Config. <<<<<<<<<<<<<<

Id: 55aa00ff
Version: 2

***** WEB TLC AREA *****
Public IP Address: 10.20.66.57
Public Subnet Mask: 255.255.255.0
Public Default Gateway Address: 10.20.66.1
Public DNS Server Address: 255.255.255.0

SNMP Trap #1 Address: 255.255.255.255
SNMP Trap #2 Address: 255.255.255.255
SNMP Trap #3 Address: 255.255.255.255
SNMP Trap #4 Address: 255.255.255.255
Trap Severity Notification: Informational

SMTP Server Name/Address:
E-mail Address #0:
E-mail Address #1:
E-mail Address #2:
E-mail Address #3:
E-mail Return Address: rmi@msl5000

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Should the Public DNS Server Address refers to the server IP that I use to access the HP MSL ?
The firmware version for the HPMSL is 5.20