Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL6060 web interface.

Sean Campbell
Occasional Advisor

MSL6060 web interface.

We have a MSL6060 are running DP 5.5 on a HPUX server.

When accessing the library remotely via web interface. 'Tape library automation managment console' i.e. http://. It prompts for a default password.

Does anyone know how to change this?
5 REPLIES
Torsten.
Acclaimed Contributor

Re: MSL6060 web interface.

The default password is "1" or "2", depending on access level. You can change it in the library setup screen.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sean Campbell
Occasional Advisor

Re: MSL6060 web interface.

Thanks Torsten. I am still unable to see the option for changing this password. The library setup screen, does not give me this option.

Do I need to change this password directly from the front panel of the MSL?
Satish M.S.
Valued Contributor

Re: MSL6060 web interface.

Mr. Campbell:

The password can only be changed from the MSL5000 utility using the serial cable connection to the MSL library Robot controller module.This is for physical security issues.

The serial cable RJ11/DB9F-P/N: FD-64281-01 or 252850-001 that shipped with the MSL will be needed, as well as, a laptop or desktop PC to connect to the MSL serial port to reset the password. The following procedure may be used to reset the Remote Management Interface password:

1.Make the serial connection to the MSL and a serial port on a laptop or desktop PC using the serial cable

2. Startup ftp://ftp.hp.com/pub/softlib/software4/COL8951/co-23765-1/
Login as Anonymous

3. Establish the program connection to MSL robot

4. On the tool bar select 'Configure'. Next select the 'Acess' tab.

5. Hopefully, this will display the current level 1 and level 2 passwords and allow them to be changed.

6. click 'OK' to complete the required operation

I really hope this works.

Thanks

Satish
Sean Campbell
Occasional Advisor

Re: MSL6060 web interface.

Thanks I will give it a try.
David Ruska
Honored Contributor

Re: MSL6060 web interface.


> The password can only be changed from the MSL5000 utility using the serial cable connection to the MSL library Robot controller module.

Actually you can change it from the front panel as well.

1) You need to know the user (i.e front panel) level 2 password (prompted for in set 2).
2) Under "Menu:Edit Options: Network:", you can change your web level 1 & level 2 passwords.
3) Power-cycle the library to make the changes effective.

The journey IS the reward.