- Community Home
- >
- Storage
- >
- Data Protection and Retention
- >
- StoreEver Tape Storage
- >
- MSL6060
StoreEver Tape Storage
1752677
Members
5525
Online
108789
Solutions
Forums
Categories
Company
Local Language
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Discussions
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-03-2004 03:40 AM
12-03-2004 03:40 AM
MSL6060
Hi,
I have a question regarding the above library.
My config is as follows:
MSL6060
4x LTO 2 drives
Proliant DL360 G4
HP Ultra320 dual channel 64bit/133 HBA
The library is directly attached scsi using the above HBA. However I would like to know if this is acceptable/sufficient for running all 4 LTO2 drives. I'm currently having problems with timeouts on one of the drives when running L&TT diags.
Additionally on bootup I am getting the 'Devic set to narrow' message.
Any help appreciated.
Rgds,
I have a question regarding the above library.
My config is as follows:
MSL6060
4x LTO 2 drives
Proliant DL360 G4
HP Ultra320 dual channel 64bit/133 HBA
The library is directly attached scsi using the above HBA. However I would like to know if this is acceptable/sufficient for running all 4 LTO2 drives. I'm currently having problems with timeouts on one of the drives when running L&TT diags.
Additionally on bootup I am getting the 'Devic set to narrow' message.
Any help appreciated.
Rgds,
1 REPLY 1
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-03-2004 03:49 AM
12-03-2004 03:49 AM
Re: MSL6060
I think that this is not sufficent at all, the recommandation is to put one LTO2 per scsi bus, so you should go per adding at least another hba, or another server.
I suppose you are using two lto2 per bus.
You need to be aware that the data you are sending to the four LTO are comming (I suppose) from some gigabit lan adapters, and all this ammount of data have to transit on the pci-x bus, the server should be able to manage all this trafic.
I suppose you are using two lto2 per bus.
You need to be aware that the data you are sending to the four LTO are comming (I suppose) from some gigabit lan adapters, and all this ammount of data have to transit on the pci-x bus, the server should be able to manage all this trafic.
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP