Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

NSR E1200-160 Install for MSL5000 Tape Library

王峻
Honored Contributor

NSR E1200-160 Install for MSL5000 Tape Library

We need install two E1200 into one MSL5060 (Include four tape driver LTO)

Solve Way:
1. Power off the MSL5060, remove all AC power cord.
2. Remove all SCSI interface cable, the SCSI terminator and Ethernet cable and RS-232 cable from the MSL5060.
3. Insert the first E1200 into the middle slot next to the controller board of the MSL5060.
4. Insert the second E1200 into the center slot on the bottom level of the MSL5060.
5. Connect ALL SCSI cables and terminator between four tape driver and E1200 as the attachment bitmap.
6. Connect all Fibre cables to FC-Switch.
7. Connect each power cord and turn on the master power switch for each power supply. Turn on the MSL5060 on by touching the GUI control panel.
8. Notice: To avoid damage to the library, ensure routers are installed in the correct option slots!