Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

NT unable to see library and drives.

Ayman Altounji
Valued Contributor

NT unable to see library and drives.

Hi,

I currently have a problem where NT is unable to see a San attached library. Has anyone got any ideas as to why??

Thanks

Stuart
1 REPLY
Ayman Altounji
Valued Contributor

Re: NT unable to see library and drives.

Make sure you have loaded the emulex driver for the FC card.
If you use a SAN switch make sure the server and MDR or FC tape controller are in the same zone