Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Netware cannot see robot on MSL over FC

Benjamin Wold
Frequent Advisor

Netware cannot see robot on MSL over FC

I have a NW6.5 sp5 server with and FC2243 HBA an cannot see the robot on an MSL6030. I see the drives.
The NW server and MSL are in a seperate zone on the switch.
I have a seperate zone for my Windows host and the MSL and that can see the robot and drives.

Using LPFC.nlm 2.20.05.
I've tried updating the fw from 1.10.17 to 2.10.a9 to 2.10a10.
No difference.
tried load nwaspi as weel with no change.

The MSL has a e1200-230 4gb NSR.
When I load hpdevbra.nlm -dev, I only see the tape drives.
I can see the NW server as a host from the NSR. DO I need to create a new map with the changer on a specific LUN??
Any ideas are appreciated.
Thanks
2 REPLIES
Benjamin Wold
Frequent Advisor

Re: Netware cannot see robot on MSL over FC

I was very tired when I wrote the previous thread. Please pardon the typos. English is my first language.
Benjamin Wold
Frequent Advisor

Re: Netware cannot see robot on MSL over FC

A Qlogic card fixed the issue. Original card was an FC2243 (LP11002). Bought a Qlogic QLA2462 as a replacement.