HPE Community
StoreEver Tape Storage
1753797 Members
7414 Online
108799 Solutions
New Discussion

Optimum SCSI card settings for Ultrium?

 
Chris Gregurek
Occasional Contributor

‎05-20-2002 09:52 AM

‎05-20-2002 09:52 AM

Optimum SCSI card settings for Ultrium?

We have a 4/40 ultrium library and use 2 Adaptec 39160 SCSI cards to control the 4 drives. Is there a particular way to set the SCSI cards so that the library and server talk to each other in the best fashion possible or should i just leave it at the factory defaults?
It's not the destination but the journey that makes it interesting.
0 Kudos
Reply
1 REPLY 1
Alex Ntow
New Member

‎05-23-2002 07:34 AM

‎05-23-2002 07:34 AM

Re: Optimum SCSI card settings for Ultrium?

Hi Chris,
the most important fact you should be aware of is that the SCSI adresses for the PCI Card (mostly 7, highest prio) should differ from the SCSI adresses of the other components of the Library. This means you could configure the Library to used the following adresses.
Controller: scsi 0
Drive 1: scsi 1
Drive 2: scsi 2
Drive 3: scsi 3
Drive 4: scsi 4

i hope this helps. Check Manual for Daisychaing options
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.