Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Optimum SCSI card settings for Ultrium?

Chris Gregurek
Occasional Contributor

Optimum SCSI card settings for Ultrium?

We have a 4/40 ultrium library and use 2 Adaptec 39160 SCSI cards to control the 4 drives. Is there a particular way to set the SCSI cards so that the library and server talk to each other in the best fashion possible or should i just leave it at the factory defaults?
It's not the destination but the journey that makes it interesting.
1 REPLY
Alex Ntow
Occasional Visitor

Re: Optimum SCSI card settings for Ultrium?

Hi Chris,
the most important fact you should be aware of is that the SCSI adresses for the PCI Card (mostly 7, highest prio) should differ from the SCSI adresses of the other components of the Library. This means you could configure the Library to used the following adresses.
Controller: scsi 0
Drive 1: scsi 1
Drive 2: scsi 2
Drive 3: scsi 3
Drive 4: scsi 4

i hope this helps. Check Manual for Daisychaing options