Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem after attempting installation of SDLT

Ayman Altounji
Valued Contributor

Problem after attempting installation of SDLT

I have a Proliant DL380, with a mirrored pair of disks on the internal array controller - port 2 - (and internal bay) for booting and the OS. I have an external storage system with 7 disks as RAID 5 on a 5300 smart array controller.
I added the SDLT on to the port 1 internal scsi port and can no longer boot or get into the system partition utilities. This continues even when I removed the tape drive. I have set the boot order correctly but it still doesn't work. Any suggestions...please?

Thanks

Craig.
1 REPLY
Ayman Altounji
Valued Contributor

Re: Problem after attempting installation of SDLT

You shold connect drive with cable VHDCI to Wide SCSI if SDLT is Extenal

No recommnend used port in Smart Array 5300. Beacuse the drive SDLT are unit that work slow speed while Array controler worked at high speed

Braulio Sanchez