Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

SSL-2020 Installation Problem

KMan
Occasional Advisor

SSL-2020 Installation Problem

I'm adding this to one of my DL380 G3 servers. I've installed an Ultra-3 SCSI card (154457-B21) and the boot sequence reports that it sees the SSL2020 as ID 0 and the SDX-500C drive as ID 4. However, in Device Manager and Backup Exec 9.1, only the drive is seen -- no robotics. Can someone help me understand how to get everyone to see the library and not just the drive? I've installed updated drivers, and I've tried deleting and reinstalling the device.

 

 

P.S. This thread has been moved from Archival Products to Tape Libraries and Drives - HP Forums Moderator

1 REPLY
KMan
Occasional Advisor

Re: SSL-2020 Installation Problem

I just found a document on Veritas' support site that described the problem as an incomplete name in the SSL2020's NVRAM. Sure enough, I followed the instructions to correct it, and everything is working.

In case someone needs it, the Doc ID is 240688, and it can be found here:
http://seer.support.veritas.com/docs/240688.htm