Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

STK 9840 configuration problem

Larry Schauer
Occasional Advisor

STK 9840 configuration problem

We have a K370 running HP-UX 10.20 and have recently connected an STK 9840 to it (SCSI interface). The following is the output from 'ioscan -f':

unknown -1 10/4/4/3.0 UNCLAIMED UNKNOWN STK 9840

What driver do I need to configure? I looked at SAM, and the stape driver is installed (tape1 and tape2 are not configured, though).

What do I need to do in order to configure the STK?

Thanks,
Larry Schauer
Packet is GOOD, TTAs are BAD
1 REPLY
Michael Tully
Honored Contributor

Re: STK 9840 configuration problem