Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Scsi ID failed on compaq proliant and dlt 20/40

silverston
Occasional Contributor

Scsi ID failed on compaq proliant and dlt 20/40

Hi,

I have a old proliant server PI 200 with a compaq 20/40 GB DLT.

All the left side of the dlt is lightning, when I boot up the server, I had a failure on the scsi id num 5 (number of my dlt)
I check the cable pbut it seems to be right
what more I can check ?

This error is frenquently

thks,

julien
2 REPLIES
Holger Mehlkopf
Occasional Advisor

Re: Scsi ID failed on compaq proliant and dlt 20/40

Hei,

run the L&TT. But it seems so that your drive is damage.

Cheers Kuifje
D
Jeffrey Willemsen
Frequent Advisor

Re: Scsi ID failed on compaq proliant and dlt 20/40

If the LED's on the left side stay on after power up then the main logic is dead (probably firmware corrupted). If they flash it indicates hardware error. In both cases your DLT needs repair.

Jeffrey
Don't change a working configuration