StoreEver Tape Storage
1748185 Members
3915 Online
108759 Solutions
New Discussion юеВ

Sun StorEdge L9 on HPUX System

 
Ray Allen_1
Frequent Advisor

Sun StorEdge L9 on HPUX System

Hi,
Does anybody know if/how you can attach a Sun StorEdge L9 DLT8000 tape library to a HPUX system. We are running an rx8620 with 11.23.
I have attached the drive to the server, but it is not seeing the drive. Ioscan does not show the drive at all. The tape drive is set autodetect. Is there a driver from HP that would recogize it. I've tried it on anohter server, but still the same thing.

Thanks in advance for your help.

Gerald
3 REPLIES 3
Luk Vandenbussche
Honored Contributor

Re: Sun StorEdge L9 on HPUX System

Hi ray,

Have you added the following drivers to your kernel
stape and autoch ?
Ray Allen_1
Frequent Advisor

Re: Sun StorEdge L9 on HPUX System

Luk,

I ran kmtune, and do NOT see either stape or autch in the parameters. Should I add the drivers?
Ray Allen_1
Frequent Advisor

Re: Sun StorEdge L9 on HPUX System

Luk,

Correction. The stape driver is there, and is in Unused state, but the autoch is not listed at all.