HPE Community
StoreEver Tape Storage
1753604 Members
6311 Online
108797 Solutions
New Discussion юеВ

TL891 on Win NT 2000

 
Pascal Lazaridis
New Member

тАО05-20-2004 03:33 AM

тАО05-20-2004 03:33 AM

TL891 on Win NT 2000

Hi,
I have a little problem. I bought a TL891 used, but my SCSI card does not see my TL891.
I have no problem during the boot and in Win2000. Everything seem fine.

My configuration is the following:

Pentium III - 256 Mo
SCSI Card SYMBIOS LOGIC 8951U (on SCSI ID 7)
TL891 (Library bus ID = 6, DLT0 bus ID = 5)
Windows 2000 SP4

How can I use my TL891 on Win 2000.
Thanx a lot for your help.

Regards
0 Kudos
Reply
2 REPLIES 2
Darryl Stacy
New Member

тАО06-22-2004 04:04 AM

тАО06-22-2004 04:04 AM

Re: TL891 on Win NT 2000

I believe you need a special SCSI card
0 Kudos
Reply
Brodie Buchanan
New Member

тАО07-07-2004 12:21 PM

тАО07-07-2004 12:21 PM

Re: TL891 on Win NT 2000

Your problem might be because you will need to use a HVD (High Voltage Differential) SCSI adapter, I'm not sure if the Symbios card you have is LVD or HVD.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.