Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

TL891DLX shows yellow in CIM

Ayman Altounji
Valued Contributor

TL891DLX shows yellow in CIM

Everything works fine but I am tired of the warning message. It also creates a warning in the system log that has an ID of 1181. I am using the most current agents on a DL 360and the library is plugged into onboard SCSI controller. the following is the event log message. Any ideas?

"Compaq Drive Array Tape Library Door Status Change. The tape library in slot 0, SCSI bus 1, SCSI target 0 has a new door status of 4.
(Library door status values: 1=other, 2=notSupported, 3=closed, 4=open)
[SNMP TRAP: 3021 in CPQIDA.MIB"
2 REPLIES
Ayman Altounji
Valued Contributor

Re: TL891DLX shows yellow in CIM

Are you sure this produces the yellow indication ?? We've got messages like that as well but status in CIM is still Green. You should be able to retrieve the cause by double clicking the icon in CIM and follow the yellow choices. It might be as simple as a cleaning job that causes the yellow status.
Check it !
Ayman Altounji
Valued Contributor

Re: TL891DLX shows yellow in CIM

hello,

when you use the latest drivers and agents from smartstart 5.30 then the problem is solved