Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Tape Software Management can't see drive

Ayman Altounji
Valued Contributor

Tape Software Management can't see drive

Hi there,

Currently I have 4 TL 891 DLX Base units (2 have 2 drives,2 have 1 drive for a total of 6 drives) connected to a FC/SCSI controller. The NT 4.0 and Netware 5.1 SO see all the drives but the Tape Software Management Console running on an NT 4 box can only detect 3 of the changers and 5 drives (incidentally, W2K only sees 3 changers and 5 drives as well). Anyone have any ideas as to the problem?

Thanks!