Tape autoloader 1/9

[Ralf Buchhold]

Hello
we have an Tape autoloader 1/9 (C7145)
with ULTRIUM 1-SCSI
I made an FW Update with hp_ltt
Library (C7145) from 2400 to 2600.
Drive 1 from E23V to E3BR
But this messages apears:
FW Update failed
Application Exeption 1020 non fatal io error
command incomplete
and now ?
Thank you Ralf

[Kurt Beyers.]

Ralf,

Just re-issue the firmware upgrade.

Kurt

[Ralf Buchhold]

Hello
thank you.
But when I will update again
the drive isnt found.
IOSCAN does not show my device
before update it looks like:
Device Qualifier: HPUltrium
Product ID: Ultrium 1-SCSI Hardware Path: 0/2/1/0.1.0
Device Type: SCSI Tape Logical Unit Number: 0
Vendor: HP Product Rev Level: E23V
Firmware Revision: 005.246 Tape Load Count: N/A
Correctable Errors: 0 Uncorrectable Errors: 0
Mfg Date Code: N/A Servo Revision: H/W.REV
Serial Number: IE72H03408
Compression Status: Enabled Compression Ratio:

Should i power down the tape ?
Ral

[David Ruska]

Ralf,

Sorry I did notice this post sooner. Did you get your issue resolved?

[Ralf Buchhold]

No sorry
the fw update failed

Thanks
Ralf