Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Tape library 2/20

Tape library 2/20

Hi guy

I have a Library 2/20 plugged in a K370.
The first scsi (HSC) is configured and claimed in ioscan. But the second one (HP-PB) is
unclaimed in ioscan. I?ve inputed in kernel
the drivers: sctl and spt. The driver schgr (in Sam) is for S700. The controler of library (c7200-8000) is unclaimed too.
Is there any patch that correct it?

Thanks

Marcia
2 REPLIES
Michael Tully
Honored Contributor

Re: Tape library 2/20

Hi Marcia,

Have a look at the attached document it should be of some assistance. Once thing to note is that the 'autoch' class will probably be the right one.

HTH
-Michael
Anyone for a Mutiny ?
Torsten.
Acclaimed Contributor

Re: Tape library 2/20

Hi,

as far as I know DLT 8000 drives are not supported on HP-PB SCSI Interfaces. You can connect these drives only to HSC cards in your K-Class (1 per controller).

Regards,
Torsten

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!