HPE Community
StoreEver Tape Storage
1751840 Members
5164 Online
108782 Solutions
New Discussion юеВ

Re: Tape library hardware Error

 
robin_53
Occasional Contributor

тАО08-15-2004 10:56 PM

тАО08-15-2004 10:56 PM

Tape library hardware Error

Hi all

Our Tape library is not working, it gives the following error

"Faild to perform an enventory check . Request to move avobe the max vertical height"

Can any one give me any suggestion

Robin
0 Kudos
Reply
2 REPLIES 2
Rick Garland
Honored Contributor

тАО08-16-2004 02:11 AM

тАО08-16-2004 02:11 AM

Re: Tape library hardware Error

Maybe have a hardware problem with the robot (something bocking its movements, cable break, a tape is not seated correctly, etc.)
0 Kudos
Reply
Marino Meloni_1
Honored Contributor

тАО08-16-2004 02:15 AM

тАО08-16-2004 02:15 AM

Re: Tape library hardware Error

I do not know which model of library you have, but you can try "library calibration, recalibration or init mechanism" command depending of the model you have, this will recalibrate the encoders and adjust the right position.
Do you have a stacked unit? do you replace some part?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.