Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Trying to find 3.5" face plate kit for C1537A drive

Gary Hasenfus
Occasional Visitor

Trying to find 3.5" face plate kit for C1537A drive

I'm moving my trusty C1537A DSS3 drive to a new system and would like to convert it from a 5.25" face plate to a 3.5" face plate. The drive is curently 3.5" with a 5.25" face plate and buffer rails that extened it for 5.25" mounting. The manual says to contact HP for the 3.5" kit but I can find any parts listed for tape drives on the HP site.