Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Ultrium 215i

Omer Qureshi_1
Occasional Visitor

Ultrium 215i

My question is i m using ultrium drive 215i for backup i receive a problem when i want to take back it will stop after 1% and 2% and ready light stop to blink and no error message coming but when you see graph in tape ware software the graph is running but no backup.

configuration of others things is using adaptec card 29160
OS = windows XP (SP1)
Software = Tapeware
System = Compaq Branded EVO
Firmware = N26D

When we take test through library tool this is 100% no error give.

now what should i do.

Regards
Omer
2 REPLIES
Leif Halvarsson_2
Honored Contributor

Re: Ultrium 215i

Hi,

I am not sure about that the drive is the problem, It may be a software problem or a problem with the server as well. Is it possible for you do do any of the following ?

- Try with a different drive.
- Try to back up a different filesystem or only a part of the filesystem.
- Try the drive on a different server.
- Try a different backup software.
Allan_24
Regular Advisor

Re: Ultrium 215i

Hi,

Perhaps an update Tapeware Service pack might help you, as of this moment there are three available service pack you can able to use. Also, if it's possible try to re install your backup software together with update service pack.You can find all this SP's @ tapeware.com.
Hope this can help.
"You should be working"