Upgrade firmware error with HP_LTT

[WW198786]

When I try upgrade firmware LTO G2 Ultrium 920, I obtain a message after 8 images transferred :
SCSI Write Buffers failure.
I have the latest version of the upgrade package.
I have tried with an older version and I obtain the same message but later.

[TapeDrive Killer]

You need to stop all backup software services in order to upgrade firmware but you can also upgrade firware using RMI (Remote Manager Interface) it is faster this way just go to the OCP (operator control Panel) Configuration >>> Configure Network Settings

Pablo Alvarado Siles

[LTT Team]

Hi,

There could be many reasons why you are receiving this error. Could you attach the EventLog.ltt & ResultLog.ltt? I would be able to root cause the issue.

Ideally, this issue occurs when there is a data corruption along the data path. It could be either due to the cable, driver, etc.

Regards,
Satya
L&TT Team

[Pontier]

Bonjour,

Je suis mainteneur spécialiste stockage sur bandes et souhaiterais rentrer en contact avec vous afin de vous proposer nos services.

Cordialement.