VERITAS issue: jobs queued

[Edgar Zapata]

We have a DL380. DAT72 tape drive.
Windows 2000 Advanced Server SP4
VERITAS Backup Exec 8.60.

For some reason I am not able to determine or work out, during the last 3 weeks, all jobs submitted get queued.
I noticed under the devices tab, server status was paused, I thought sure enough that was the reason all of our jobs got queued. So I resumed the server only to find out nothing changed.
Is there a way to solve this situation and perform the backup jobs?
I have recently pluged in a new device.
I unpluged the Compaq AIT 50 tape drive unit and got a new HP DAT 72.
I installed the drivers, plus the VERITAS device drivers.
I have tried using the tape device with ntbackup and works okay.
Is there anything I'm missing?

Thank you and regards.

[clay bowman]

Just make sure the backup jobs are pointing to the new device, if they are pointng to the AIT 50 they won't run

[Edgar Zapata]

Thanks for you're being there and for your quick response. It is much appreciated.
I did that already. under the job definitions tab, properties, I confirmed they are.
any clues will be welcomed.

regards.

[Edgar Zapata]

this is what it looks like.
see attached.

[Edgar Zapata]

any of you see anything strange here?
c attached.

[Edgar Zapata]

any of you see anything strange here?
c attached.

[clay bowman]

Can you inventory and erase the tapes? I'll assume you purchased the correct tapes. Make sure the media set is set correctly and the jobs point to that media set. Try creating a new job and see if it will run.

[Edgar Zapata]

Nope.
I can't either inventory or erase the tapes.
At least the tape I'm using, came together with the drive tape. I assume at least this one's good.

Regarding the media set, see attached. I kept default values; that is:
Append period: Infinite - Allow append.

I created a new backup job, pointed to the right device and media set. still got queued.

[clay bowman]

I would find out first why I can't inventory or erase the tape. Make sure the Removable Storage manager service is stopped and set to manual. Stop all of the backup exec services. Download Library and Tape Tools 3.5 sr2. Execute L&TT's and with the tape inserted go to the Test tab and run a read write test. Under Support there is an option to save the support ticket to file. Zip it up and post it here, those guys are good about responding to support tickets.

[Edgar Zapata]

I've followed your instrucitions step by step.
under L&TT, I see only:
Restore and Backup Pre-Test
which one you mean?

gotta go.
tahnk you much.
BTW, This is importatnt.

I'll be back tomorrow.