HPE Community
StoreEver Tape Storage
1753767 Members
5860 Online
108799 Solutions
New Discussion

W2K Pro: CBII 9.0 not seeing SCSI Archive Python 28849 w/Adaptec AHA-2940

 
Dave Pompea
New Member

‎06-22-2003 02:32 PM

‎06-22-2003 02:32 PM

W2K Pro: CBII 9.0 not seeing SCSI Archive Python 28849 w/Adaptec AHA-2940

Is there some reason that CBII 9.0 shows No Device Found for my drive ?

If I run the Configure Devices applet, it shows up. W2K Backup finds it, STOMP Backup MyPC v4.85 finds it.

W2K (w/SP3) installed the MS aix78xx.sys (v2.20b) driver for the SCSI card and the 4mmdat.sys (v5.00.2195.4326) driver for the tape drive.

It also looks like CB 9.0 might be disabling the RSM of W2K, while STOMP does not.

Should I unplug the drive, remove the tape device, install CB 9.0, then let W2K find it again ?

Tx,
Dave
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.