StoreEver Tape Storage
1748244 Members
3914 Online
108760 Solutions
New Discussion

W2K Pro: CBII 9.0 not seeing SCSI Archive Python 28849 w/Adaptec AHA-2940

 
Dave Pompea
New Member

W2K Pro: CBII 9.0 not seeing SCSI Archive Python 28849 w/Adaptec AHA-2940

Is there some reason that CBII 9.0 shows No Device Found for my drive ?

If I run the Configure Devices applet, it shows up. W2K Backup finds it, STOMP Backup MyPC v4.85 finds it.

W2K (w/SP3) installed the MS aix78xx.sys (v2.20b) driver for the SCSI card and the 4mmdat.sys (v5.00.2195.4326) driver for the tape drive.

It also looks like CB 9.0 might be disabling the RSM of W2K, while STOMP does not.

Should I unplug the drive, remove the tape device, install CB 9.0, then let W2K find it again ?

Tx,
Dave