HPE Community
StoreEver Tape Storage
1753474 Members
4831 Online
108794 Solutions
New Discussion

Re: Windows doesn't see T3000

 
Dave Ketchen
New Member

‎07-27-2002 11:29 AM

‎07-27-2002 11:29 AM

Windows doesn't see T3000

I have moved a T3000 connected by the floppy controller to a PC with Windows 95 ver B to another PC with the same OS. I get a hardware response when I power up and insert a tape. I have installed HP Colorado Backup II ver 6.0 but I cannot get the software or Device Mgr to "see" the drive. When the software is installed, a SCSI driver is added to Device Mgr even though there is no SCSI card present. Any suggestions for drive recognition?
0 Kudos
Reply
1 REPLY 1
Dave Ketchen
New Member

‎07-27-2002 07:39 PM

‎07-27-2002 07:39 PM

Re: Windows doesn't see T3000

Problem solved. I installed the DOS version of the backup software (downloadable from the HP website) to help troubleshoot the problem. The drive was recognized with DOS backup. When Windows was restarted afterward, the tape drive was then recognized and added to the Device Manager and the Colorado Backup II software.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.