Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

about HP StorageWorks 1/8 Tape Autoloader

jiyl
Occasional Advisor

about HP StorageWorks 1/8 Tape Autoloader

think you reply,
are the other tape autoloaded while the one is writed full in HP StorageWorks 1/8 Tape Autoloader,if i want to do this and what i should do,think you!!!!
1 REPLY
Claudio Ruzza_1
Valued Contributor

Re: about HP StorageWorks 1/8 Tape Autoloader

Hope I understood well.
Set up your autoloader to use sequential mode.
I read from Autoloader user guide:
********************************************
Sequential mode is used when the backup software is NOT robotics-aware or was
designed for standalone drives only. Sequential Mode is useful when a software
application is not available. In Sequential mode, the autoloader automatically
loads and unloads tapes from the drive. The operator determines the first tape to
load by loading the desired tape into the tape drive using the autoloader front
panel
********************************************
If you want to make your autoloader use new media after having filled one, the best way in my opinion is to use a piece of backup software.

You have a wide variety of vendor and product. Firstly I mention HP Data Protector, because it comes from the same brand of your autoloader and then because is reliable and cheaper than competitors.
There's also Veritas Backup Exec or netbackup. Legato networker is another choice, and CA Brighstore Arcserve is another one.

Hope it helps
Claudio Ruzza