Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

adding a new e1200-160 dataroute and tape drive

WilliamSmith11
Super Advisor

adding a new e1200-160 dataroute and tape drive

Hi
I have a MSL6000 series with two ultrium 3 tape drive, is attach to a SAN throught a e1200-160.

I want add a ultrium 4 tape drive but I want that be controlled by a second e1200-160 that I have bought.

Have I to map the new tape drive and the charger to the new e1200-160?

Have I to may some change to the actual configuration with the two ultrium 3 and the e1200-160 configuration?

Regards

W.S
3 REPLIES
Torsten.
Acclaimed Contributor

Re: adding a new e1200-160 dataroute and tape drive

Leave the first NSR untouched, install the second, connect SCSI cable to drive, FC cable to switch and create a mapping - that's it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Miguel Carranza
Frequent Advisor

Re: adding a new e1200-160 dataroute and tape drive

Hi. i have a similiar issue. just replaced my nsr. How do I create the port maping suitable for my setting?
I have 2 windows servers attached to the EVA SAN + the library. It used to be working with the previous router, i cannot get the servers to see the library now.
Torsten.
Acclaimed Contributor

Re: adding a new e1200-160 dataroute and tape drive

Better to open your own thread!


Did you save the config of your old NSR???

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!