cpq32fs2 - 15

[Michael S. Androsov]

I have 4/16 GB TurboDAT Drive on Compaq ProLiant 2000 server. This drive connected to the integrated Fast-SCSI-2 Controller.
I'm using Windows NT Server 4.0 (SP6a) and ntbackup utility for reserving copying.
Backup sessions normally finished. But in the Event Log I received next message:

Source: cpq32fs2
ID: 15
The device, \Device\ScsiPort1, is not ready for access yet.

I installed new driver for the Compaq SCSI-2 Controller. And installed last version of BIOS. But this message exists.

What's a problem?

Michael S. Androsov
EXPOCENTR

[Marino Meloni_1]

I would suggest to disable CIM agents and surveyor service.

[Michael S. Androsov]

In the Services list I disabled Compaq Remote Monitor Service.
But this message exists.

Michael S. Androsov
EXPOCENTR