Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

dat24+LH3+SCO5.0.5+MicroLITEBackupEDGE+OBDR

Pen Smith
Occasional Advisor

dat24+LH3+SCO5.0.5+MicroLITEBackupEDGE+OBDR

2 days "successfully" running EDGE vs.01.02 as OBDR on SCO OpenServer5.0.5 Both lights flash alternately when boot from OBDR tape, but EDGE menu does not auto appear and verify has a problem with reading compression. By the book install and config as far as I know; any sugestions from HP as to firmware or driver issues such as those on site for NT dat OBDR?
Thanks Pen Smith
IT DOESN'T MATTER