device

[Sheng Jun]

there is the device
/dev/rac/c0t5d1. And I can move the tape by command 'mc' and '/opt/omni/lbin/uma'. While I'm still unable to configure it into omniback. pls. advise..thx

ext_bus 0 0/0/1/0 c720 CLAIMED INTERFACE SCSI C896 Ultra
Wide LVD
target 0 0/0/1/0.5 tgt CLAIMED DEVICE
tape 0 0/0/1/0.5.0 stape CLAIMED DEVICE HP C9264CB-
VS80
/dev/rmt/0m /dev/rmt/c0t5d0BESTb
/dev/rmt/0mb /dev/rmt/c0t5d0BESTn
/dev/rmt/0mn /dev/rmt/c0t5d0BESTnb
/dev/rmt/0mnb /dev/rmt/c0t5d0eBEST
/dev/rmt/c0t5d0BEST
autoch 0 0/0/1/0.5.1 schgr CLAIMED DEVICE HP C9264CB-
VS80
/dev/rac/c0t5d1
target 1 0/0/1/0.7 tgt CLAIMED DEVICE

[Vincent Farrugia]

Hello,

Is this the Surestore autoloader 1/8?

If yes, this is not officially supported under HP-UX...

Vince