hp N1200 does not not detect windows host on fc port

[ilayy]

hi all i have a windows server 2003 connected to a sun switch
- an NSR n1200 also connected to the same switch
-MSA connected to san switch
when i configure zoning i set the server with the NSR in the same zone but the NSR does not show any devices connected to the FC port
but when i put the MSA with the NSR in the same zone the NSR detect the MSA on the FC port.

why it is not detecting the windows host how can i solve this problem

[Marino Meloni_1]

Check the zoning, be sure the it is correct.

Reboot your windows server

log in the NSR, and issue a manual
discovery, it should detect the windows host wwn


Be sure to have the latest FW in the NSR, and eventually reset it to default value

[ilayy]

hi
i have checked the zoning and it is ok and i have rebooted the server and nothing changes but i dont know why when i put the server and the msa and the router in one zone the router detect the msa when i remove the msa from the zone the router doesn't detect anything

[ilayy]

i removed the NSR and replace it by a fiber drive and everything work well