Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

hp N1200 does not not detect windows host on fc port

ilayy
Regular Advisor

hp N1200 does not not detect windows host on fc port

hi all i have a windows server 2003 connected to a sun switch
- an NSR n1200 also connected to the same switch
-MSA connected to san switch
when i configure zoning i set the server with the NSR in the same zone but the NSR does not show any devices connected to the FC port
but when i put the MSA with the NSR in the same zone the NSR detect the MSA on the FC port.

why it is not detecting the windows host how can i solve this problem
3 REPLIES
Marino Meloni_1
Honored Contributor

Re: hp N1200 does not not detect windows host on fc port

Check the zoning, be sure the it is correct.

Reboot your windows server

log in the NSR, and issue a manual
discovery, it should detect the windows host wwn


Be sure to have the latest FW in the NSR, and eventually reset it to default value

ilayy
Regular Advisor

Re: hp N1200 does not not detect windows host on fc port

hi
i have checked the zoning and it is ok and i have rebooted the server and nothing changes but i dont know why when i put the server and the msa and the router in one zone the router detect the msa when i remove the msa from the zone the router doesn't detect anything
ilayy
Regular Advisor

Re: hp N1200 does not not detect windows host on fc port

i removed the NSR and replace it by a fiber drive and everything work well