Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

locate scsi command failed, key = 0x3, asc = 0x14, ascq = 0x0

nixiufang
Occasional Contributor

locate scsi command failed, key = 0x3, asc = 0x14, ascq = 0x0

when backup,tape mounted,but when position,display warning messages:Warning bptm(pid=12030) cannot locate on drive index 2, locate scsi command failed, key = 0x3, asc = 0x14, ascq = 0x0

whether the tape drive have something wrong.harware failure or tape failure.

how to deal with it?

there is information from root mail:
# mail
From root@hr02 Sun Nov 28 16:02:00 EAT 2004
Received: (from root@localhost)
by hr02 (8.9.3/8.9.3) id QAA14719;
Sun, 28 Nov 2004 16:02:00 +0800 (EAT)
Date: Sun, 28 Nov 2004 16:02:00 +0800 (EAT)
Message-Id: <200411280802.QAA14719@hr02>
To: root@hr02
From: root@hr02
Subject: hr02: Event Monitor Notification

>------------ Event Monitoring Service Event Notification ------------<

Notification Time: Sun Nov 28 16:02:00 2004

hr02 sent Event Monitor notification information:

/storage/events/tapes/SCSI_tape/0_0_10_0_0.2.25.255.0.0.2
is >= 3.
Its current value is CRITICAL(5).



Event data from monitor:

Event Time..........: Sun Nov 28 16:02:00 2004
Severity............: CRITICAL
Monitor.............: dm_stape
Event #.............: 100243
System..............: hr02

Summary:
Tape at hardware path 0/0/10/0/0.2.25.255.0.0.2 : Media failure


Description of Error:

The device was unsuccessful in reading data for the current I/O request
because it could not find the requested recorded entity on the medium. The
request may have been processed in a way which could cause damage to or
loss of data.

For furthur isolation of the problem, it may be possible that the
combination of values of Sense Code, Sense Qualifier and Sense Key may be
vendor specific. In that case, please contact the manufacturer of the
device. It may also be possible that the combination of SCSI Sense
Code/Qual/Key was not intended to be used by this type of device.

Probable Cause / Recommended Action:

Reformatting the medium may fix the problem.

Alternatively, the medium in the device is flawed. If the medium is
removable, replace the medium with a fresh one.

Alternatively, if the medium is not removable, the device has experienced
a hardware failure. Contact your HP support representative to have the
device checked.

Additional Event Data:
System IP Address...: 172.20.4.89
Event Id............: 0x41a985f800000000
Monitor Version.....: B.01.05
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_dm_stape.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
0x41a985f800000000
Additional System Data:
System Model Number.............: 9000/800/rp7410
OS Version......................: B.11.11
System Firmware Version.........: 16.11
System Serial Number............: SGH43241LS
System Software ID..............: 729066710
EMS Version.....................: A.03.20
STM Version.....................: A.35.00
System Current Product Number...: A6752A
System Original Product Number..: A6752A
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/scsi.htm#100243

v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v



Component Data:
Physical Device Path....: 0/0/10/0/0.2.25.255.0.0.2
Inquiry Vendor ID.......: HP
Inquiry Product ID......: Ultrium 1-SCSI
Firmware Version........: E38W
Serial Number...........: HU73A02465

Product/Device Data:

Logger ID.........: stape
Product Identifier: SCSI Tape
Product Qualifier.: HPUltrium
SCSI Target ID....: 0x00
SCSI LUN..........: 0x02

I/O Log Event Data:

Driver Status Code..................: 0x00000005
Length of Logged Hardware Status....: 26 bytes.
Offset to Logged Manager Information: 32 bytes.
Length of Logged Manager Information: 30 bytes.

Hardware Status:

Raw H/W Status:
0x0000: 00 00 00 02 F0 00 03 00 00 00 00 0E 00 00 00 00
0x0010: 14 00 00 00 50 90 00 00 00 00

SCSI Status...: CHECK CONDITION (0x02)
Indicates that a contingent allegiance condition has occurred. Any
error, exception, or abnormal condition that causes sense data to be
set will produce the CHECK CONDITION status.

SCSI Sense Data:

Undecoded Sense Data:
0x0000: F0 00 03 00 00 00 00 0E 00 00 00 00 14 00 00 00
0x0010: 50 90 00 00 00 00

SCSI Sense Data Fields:
Error Code : 0x70
Segment Number : 0x00
Bit Fields:
Filemark : 0
End-of-Medium : 0
Incorrect Length Indicator : 0
Sense Key : 0x03
Information Field Valid : TRUE
Information Field : 0x00000000
Additional Sense Length : 14
Command Specific : 0x00000000
Additional Sense Code : 0x14
Additional Sense Qualifier : 0x00
Field Replaceable Unit : 0x00
Sense Key Specific Data Valid : FALSE
Sense Key Specific Data : 0x00 0x50 0x90

Sense Key 0x03, MEDIUM ERROR, indicates that the command terminated
with a nonrecovered error condition that was probably caused by a
flaw in the medium or an error in the recorded data. This sense key
may also be returned if the device is unable to distinguish between a
flaw in the medium and a specific hardware failure (sense key 0x04).

The combination of Additional Sense Code and Sense Qualifier (0x1400)
indicates: Recorded entity not found.

SCSI Command Data Block: (not present in log record)

Manager-Specific Information:

Raw Manager Data:
0x0000: 04 40 13 BE 00 00 04 00 00 00 00 02 00 00 00 00
0x0010: 04 00 02 16 FE 00 00 06 08 00 00 04 00 00


>---------- End Event Monitoring Service Event Notification ----------<

?
2 REPLIES
Marino Meloni_1
Honored Contributor

Re: locate scsi command failed, key = 0x3, asc = 0x14, ascq = 0x0

Sese code 03 is refered as Medium error (Medium a the tape not as the level)

ASC 14 00 mean:
- Recorded entity not found
A SPACE or Locate failed because a format violation prevented the target of the operation from being found.

I can suggest you to install L&TT and run R/W test on a brand new cartridge, so you will be able to see if the problem come from the tape or from the R/W head fo the LTO

marino
nixiufang
Occasional Contributor

Re: locate scsi command failed, key = 0x3, asc = 0x14, ascq = 0x0

Sese code 03 is refered as Medium error (Medium a the tape not as the level)

ASC 14 00 mean:
- Recorded entity not found
A SPACE or Locate failed because a format violation prevented the target of the operation from being found.

I can suggest you to install L&TT and run R/W test on a brand new cartridge, so you will be able to see if the problem come from the tape or from the R/W head fo the LTO

marino

Sese code 03 is refered as Medium error (Medium a the tape not as the level)

ASC 14 00 mean:
- Recorded entity not found
A SPACE or Locate failed because a format violation prevented the target of the operation from being found.

I can suggest you to install L&TT and run R/W test on a brand new cartridge, so you will be able to see if the problem come from the tape or from the R/W head fo the LTO

marino

Sese code 03 is refered as Medium error (Medium a the tape not as the level)

ASC 14 00 mean:
- Recorded entity not found
A SPACE or Locate failed because a format violation prevented the target of the operation from being found.

I can suggest you to install L&TT and run R/W test on a brand new cartridge, so you will be able to see if the problem come from the tape or from the R/W head fo the LTO

marino

Thx,marino.
Enviroment:Veritas Netbackup 4.5 fp3+hp-ux 11.11+Compaq msl5060.
Maybe it is media failure.but there is too many medias which write error,then those medias were frozen.so i have to put many medias into the library.Why so many medias is failure?It looks so abnormal.
Yes,i have installed hp-ltt in my master server,but i don't know how to use it.