Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

ltf equivalent on HP-UX

Orrin
Valued Contributor

ltf equivalent on HP-UX

Hi all,

We have been initialising tapes on Tru64 Unix using the following command.
ltf -iLfv R11111 /dev/ntape/tape0_d1
-i = Initializes an ANSI labeled Magnetic tape
-L = a Six character Label "R11111"
-f = to specify device (/dev/ntape/tape0_d1
-v = verbose mode.

My question is as follows.
I get an error when I try to use these tapes in HP ( expected)
The tape drive model used is a SDLT 160/320 GB

Is there an equivalent command on HP-UX to achive the same thing.

Regards,
Orrin.