StoreEver Tape Storage
1748148 Members
3683 Online
108758 Solutions
New Discussion юеВ

Re: mnstalling tape library option in arcserve 6.6

 
Ayman Altounji
Valued Contributor

mnstalling tape library option in arcserve 6.6

We have just one dlt,The cable connections from left are (slot1) to right.
differencial cable to scsi card slot 1,cable in slot 2 looping to 3 and slot 4 terminator.The library bus ID is set to 1 and the tape scsi is in the id 5.After aplying nwtape and cpqscsi in startup command and start with arcserve 6.6.the follow error apears.
Loading TAPESVR.NLM, Computer Associates release...
Feb 22 00:39:38 Scanning Board 0, Compaq Ultra/Fas, Board Name = BOARD0
SCSIID 00: < No Device Present >
SCSIID 01: COMPAQ TL891 0514 (Changer)
SCSIID 02: < No Device Present >
SCSIID 03: < No Device Present >
SCSIID 04: < No Device Present >
SCSIID 05: < No Device Present >
SCSIID 06: < No Device Present >
E7027 Failed to locate any tape drives on Board [BOARD0]
E7028 Group [ARCSERVE] failed to initialize properly and will not be created.
STANDARD.NLM is loaded

E6916: No backup device was found by Tape Server

TAPESVR.NLM has been loaded successfully
STANDARD.NLM is unloaded
TAPESVR.NLM is unloaded

From nw console In The tape server from arcserve there is no tape driver,and the tape option library instalation we can?t see and add the tape driver to changer.
2 REPLIES 2
Ayman Altounji
Valued Contributor

Re: mnstalling tape library option in arcserve 6.6

Hi I have been having a problem similar to this> Although I have been using the Fibre Tape Conroller II. Do a list devices at the Netwware console prompt. If Netware does not see the tape drive DEC something then Arcserve will not see it. I suggest you check your cable connections and the female side of the connectors. Hope this helps
Ayman Altounji
Valued Contributor

Re: mnstalling tape library option in arcserve 6.6

Currently, support for Digital Alpha and higher-end Storageworks products is not on this forum. If you are in the US or Canada, call 1-800-354-9000. If you are elsewhere, please contact our nearest offices for support information or check any service contracts you may have for the product in question.