msl 6000 problem

[mo ali_1]

we have an msl 6000 series tape library when ever we connect the tape library to our 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver in our ml530 server the server crashs and if you connect before booting the server doesn't boot, unless you remove it

[Marino Meloni_1]

check all connectors for bent/broken pins, this is a tipical situation where some pins of the connectors are touching some grounding

Marino

[mo ali_1]

the pins are fine

[Uli Böhm]

If I remember right tape devices are not supported on the internal SCSI Controller, only stand alone drives are allowed. You need an additional SCSI controller.