Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

msl6030 Nonvol Trace Question

JohnWRuffo
Honored Contributor

msl6030 Nonvol Trace Question

***** NON-VOLATILE ERROR LOG *****
0 Power-On Hours, Error: 100f, Task: ScsiTsk (00a01600)
...

***** NON-VOLATILE HISTORY LOG *****

We have about 100 of these Error 100f before the history log... should I be concerned?
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
3 REPLIES
David Ruska
Honored Contributor

Re: msl6030 Nonvol Trace Question

Those are unterminted SCSI bus resets. If you have a controller card not connected to a host, it need to have a terminator (applies to master and slaves).
The journey IS the reward.
JohnWRuffo
Honored Contributor

Re: msl6030 Nonvol Trace Question

Thank you David

OK... I will talk to the local SA and find out if he disconnected the library from the server at some point.

How do I flush this trace file so I can see if it happens again?
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
David Ruska
Honored Contributor

Re: msl6030 Nonvol Trace Question

The errors are on the non-volatile log. I'm not aware of a way to clear them.

However, the errors have a power-on timestamp:

0 Power-On Hours, Error: 100f
----------------

I'll guess that the library was first turned on without being cabled to the host.

Also, this error (100f) will appear on the front panel, so you will know if you are still getting them.
The journey IS the reward.