Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

msl6030 report something wrong!!

Jaieun Chu
Advisor

msl6030 report something wrong!!

I am connected msl6030 with web brouser
http://1.1.1.1 (e1200 ns router ip)
and I am found something wrong.

Msl6030 have two ultrium-2 drive.
But report info me that three drive founded
and one drive down message..

I attach report.
Would you give me some idea!
system engineer
5 REPLIES
Jaieun Chu
Advisor

Re: msl6030 report something wrong!!

I attach report file again!!
system engineer
Jaieun Chu
Advisor

Re: msl6030 report something wrong!!

attach have problem
so I convert it with text file!!!



DISCOVERY INFORMATION


SCSI Bus 0 Devices

Bus Target ID LUN ID Device Type State Map Count Device Description
0 0 0 CHGR UP 3 HP MSL6000 Series 0518
0 1 0 TAPE UP 3 HP Ultrium 2-SCSI F68W
0 2 0 TAPE DOWN 1
1 2 0 TAPE UP 2 HP Ultrium 2-SCSI F68W
system engineer
Charles Snowdon
Occasional Visitor

Re: msl6030 report something wrong!!

Your NSR (E-1200) has done a scsi bus device discovery when you have had all three devices connected to BUS 0,
(NSR->BUS0->MSL->Tape0->Tape1->Terminator)
(NSR->BUS1->Termintor)
you have then moved/added the scsi cables to the tape drive to BUS 1 on the NSR and is currently running ok
(NSR->BUS0->MSL->Tape0->Terminator)
(NSR->BUS1->Tape1->Terminator), the "ghosted" tape drive will be "DOWN" until you reboot the NSR

If your hosts connot see the second tape drive then your host maps may need adjusting as the current configuration
(NSR->BUS0->MSL->Tape0->Terminator)
(NSR->BUS1->Tape1->Terminator)
is the prefered solution

Charles Snowdon

rich pattison
Trusted Contributor

Re: msl6030 report something wrong!!

The "ghost" tape drive (0 2 0 TAPE DOWN 1) - has a map count of 1 - which means it will not go away until you delete it from the map.

Review your mapping - delete the ghost unit, then reboot (don't forget to "activate map settings and save") - it would be a good idea to do a 'discovery' too, before rebooting.
Jaieun Chu
Advisor

Re: msl6030 report something wrong!!

Thank you!! Every one!!
I have solved it by initializing library and
e1200 router ...
system engineer