Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

msl6030

ess
Super Advisor

msl6030


HI All
I have 1 msl 6030 and 1 tape drive model 960 u3.
i need one tape drive add to slot 2 but when install tape drive 2; tape drive 1 go to mode initialize.
both tape drive is safe.
please help.
this autoloader one e1200-320 4gb fc interface card available
7 REPLIES
Torsten.
Acclaimed Contributor

Re: msl6030

Please tell about your cabeling!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Patrick Terlisten
Honored Contributor

Re: msl6030

Hello,

sounds like a misconfiguration. Check this doc for the right cabling.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=316040&prodTypeId=12169&prodSeriesId=316040&objectID=c00023651

Regards,
Patrick
Best regards,
Patrick
ess
Super Advisor

Re: msl6030

hi
tanks for help.
i check this cabling but not resolve the problem.
Rob Leadbeater
Honored Contributor

Re: msl6030

Have you gone through the options on the front panel to get it to scan for the new drive ?

Cheers,
Rob
ess
Super Advisor

Re: msl6030

hi
yes i go to ocp and scan new drive but not found any new device.
so the problem is stable.
tanks for the best help.
Torsten.
Acclaimed Contributor

Re: msl6030

Again, Please tell about your cabeling!

Should be

NSR -> tape -> terminator

NSR -> lib ctrl -> tape -> terminator

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ess
Super Advisor

Re: msl6030

hi
yes the cableing is the your sample say you.